• mg豪华版冰球突破视频:產品名稱:GRINNELL VALVES 格林奈爾蝶閥(現貨)

  • 產品型號:1000系列,8000系列,WC-8100,GHP系列
  • 產品廠商:GRINNELL格林奈爾
  • 產品價格:0
  • 折扣價格:0
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹:
GRINNELL VALVES 格林奈爾蝶閥,格林奈爾閥門,1000系列,8000系列,WC-8100,GHP系列GRINNELL VALVES 格林奈爾蝶閥(現貨)
詳情介紹:
GRINNELL VALVES 格林奈爾蝶閥 GRINNELL VALVES 格林奈爾蝶閥(現貨
主要包括1000,8000,GHP三大系列

歡迎來到Grinnell閥門公司
Grinnell格林奈爾是工業、商業和建筑市場閥門的優越制造商。
Grinnell格林奈爾閥門采用*先進的加工設備生產。每個閥門在出廠前都經過110%的打壓測試,確保每一個閥門的安全可靠。
現貨供應GIRNNELL VALVES  美國格林奈爾光桿蝶閥,氣動蝶閥,現貨口徑有:DN80mm,DN100mm,DN150mm等規格。
型號為:
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150







 
 
Series 1000 Resilient Seated Butterfly Valves

 
 

冰球突破怎么卡免费 www.imvfi.icu BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.

STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.

SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.

Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.

TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.

 
Series 1000 Drawings

 

PDF

Wafer Barestem
Wafer Lever Operated
Wafer Gear Operated

Lug Barestem
Lug Lever Operated
Lug Gear Operated


 
 
Series 8000 Resilient Seated Butterfly Valves

 
 

BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.

STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.

BEARINGS
Two bronze or Teflon®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.

Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.

Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.

DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.

Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange.
 

* Teflon® is a registered trademark of the E.I. DuPont de Neymour Company

 


 
 
Series 8000 Drawings

 

PDF

Dimensional Drawings with New Stem Dimensions
2" - 12" WAFER Bare Stem
2" - 12" LUG Bare Stem
14" - 24" WAFER Bare Stem
14" - 24" LUG Bare Stem

Dimensional Drawings with Old Stem Dimensions
2”-12” Wafer Barestem
14”-24” Wafer Barestem
2”-12” Wafer Lever Operated
2”-12” Wafer Gear Operated
14”-24” Wafer Gear Operated
2”-8” Wafer w/ 80 psi S/R Pneumatic Actuators
10”-12” Wafer w/ 80 psi S/R Pneumatic Actuators
2”-10” Wafer w/ Electric Actuators
12” Wafer w/ Electric Actuators
Wafer Sanitary Valves

2”-12” Lug Barestem
14”-24” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated
14”-24” Lug Gear Operated
2”-8” Lug w/ 80 psi S/R Pneumatic Actuators
10”-12” Lug w/ 80 psi S/R Pneumatic Actuators
2”-10” Lug w/ Electric Actuators
12” Lug w/ Electric Actuators
Lug Sanitary Valves



Series GHP High Performance Butterfly Valves

GHP with EPI  

Body Material & Standard:
Carbon Steel
ASTM A216-WCB or
316 Stainless Steel
ASTM A351-CF8M

DISC Material & Standard:
316 Stainless Steel
ASTM A 351-CF8M

Stem & Taper Pins Material & Standard:
17-4PH
ASTM A 564 Cond.
H10751-CF8M

Gland Bridge Material:
17-4SS PH

Packing Material:
PTFE or Graphite

Bearings Material & Standard:
316 SS Nitride

 

Seat Retaining Ring
Material & Standard:

Carbon Steel ASTM A36
or
Stainless Steel ASTM A240

Seat Material & Standard:
RTFE
Reinforced polytetrafluoroethylene [optional: PTFE]
Two-Piece Stem Design
Two-piece stem disc geometry maximizes flow capacity by increasing the available flow area through the valve. This increase in disc efficiency results in higher valve Cv.
 

COMPETITOR
one-piece stem

HI-SEAL
two-piece stem

 
Aspect Ratio = Open Area ÷ Disc Area 

 Series GHP High Performance Butterfly Valves

PDF

2”-12” Wafer Barestem
12”-12 Wafer Lever Operated
2”-12” Wafer Gear Operated

2”-12” Lug Barestem
2”-12” Lug Lever Operated
2”-12” Lug Gear Operated

 

 
產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!

粵公網安備 44030702001078號